How does the application construction of pe plate need to weld

How to weld for the application of pe plate construction. Mention pe sheet related knowledge, I believe you are not unfamiliar, the content in the above several articles have been told a lot, from which you can understand that the pe sheet is a kind of sheet we often use, it is small density, easy welding and processing, with superior chemical resistance, heat resistance and impact resistance, non-toxic, tasteless is currently one of the most in line with environmental requirements of engineering plastics. So how to do a good job of welding in our application construction?

The welding method of pe plate is generally considered to be irreversible thermoplastic welding. A few processes such as induction welding can produce reversible assemblies. As for the choice of which method should be selected in the design of the parts, because the welding method is very important to the need for the description of the parts, and different welding methods have different effects. It is suitable for almost all large or small thermoplastic parts. It is suitable for welding soft semi-crystalline thermoplastics such as pe sheet or PP sheet. Since the different die surface temperatures are applicable to two different thermoplastic materials, this process is best suited for welding different materials. Hot plate welding can achieve very high welding strength. However, the cycle of this process can be relatively long, requiring 15s for small parts and a few minutes for large parts. Hot gas welding is widely used to join thermoplastic profiles and sheets to produce large parts of the welding method. It is suitable for the repair of small injection molding parts, thermoplastic parts and the manufacture of sample parts that require some assembly. It is important to produce the electrode with the same polymer brand as the part to be welded.

The above content is our introduction to the application of pe plate welding knowledge, but also hope that through the above content can be told to the majority of users of the application of some help.